Fishing-rods

 

Twenty it is put back majority of fishing-rods became from fiber glass. Many modern fishing-rods are made of graphite or carbide of a pine forest or from connections of all three materials. New materials, for example, a kevlar are constantly developed. Besides, graphite fishing-rods become stronger by means of new materials, such as silicone carbide - "viskerz" of manufacture of company "Daiwa"
Similar, that graphite fishing-rods will dominate in the market. They weigh less, are fast stabilised after a throw and practically out-of-date fishing-rods from fibreglass are more sensitive to bait movements, than. But also they have a lack: they are rather fragile and it is necessary to concern them in the respective image. Having weighed all pro and contra, it is possible to tell, that fiber glass fishing-rods are more universal. The competition between manufacturers of fishing-rods has for the last years amplified. Each of them confirms, what exactly its structure of fiber glass and the filler, the best. However the fishing-rod of containing 80-90 % of a carbon fibre, not necessarily is better than a fishing-rod only from 75 % of this structure. Qualities of a fishing-rod basically are defined by its design and a design.

the System and length of a fishing-rod

The fishing-rod System, or that as it works at a throw and a take out of fish, is defined both its thickness and that material of which it is made.

the Fishing-rod of a slow system is bent on all length. Strong enough for a take out of a pike and elastic enough to sustain all its jerks, it allows to make an exact throw. Unfortunately, this fishing-rod frequently does not have hardness for sharp cutting that demand good skills from the fisher.

Fishing-rods of an average system are strong enough and elastic for correct cutting and an exact throw. At a take out the top half of fishing-rod is bent only.

At a fishing-rod of a fast system its top third is bent only. Strong enough, it allows to do distant throws and sharp cuttings, however accuracy of throws leaves much to be desired. As its top third fishing-rod works only less sensitively at spoon-bait conducting.

the Superfast system is defined by work only a bending top quarter of a fishing-rod. This type of a fishing-rod possesses simply fantastic qualities for a throw and is used in competitions on a casting, and also for a fishing from sea coast, however thus other end of a fishing-rod is closer to the handle, remains a little involved. On it for catching of a pike from coast, with use of a natural nozzle instead of it the fishing-rod of a slow system is often used.

It is necessary to remember, that the system of a fishing-rod does not specify, what weight of a bait approaches for it.

Durability of a fishing-rod and its possibility of a throw of baits of various weight are defined by the conical form of its top end, diameter and a combination of the components which are a part of a material of which it is made. On Extent of many years manufacturers use a little simple, but effective systems for correct selection of a fishing-rod.

 

Some start with bait weight, for example, 14-29 grammes. It means, that a fishing-rod strong enough to throw baits of such weight. As a rule, by means of such fishing-rod it is possible to throw baits in weight from 8-10 grammes to 35 grammes. However the weight of a thrown bait cannot be increased indefinitely. Other manufacturers use digital system, often subdividing fishing-rods on four weight classes. For example, 1st class includes over the easy fishing-rods calculated on baits is powerful 2-10 grammes. For 2nd class the bait in 10-20 grammes is provided. For 3rd class in 20-30 grammes and for 4th class in 40-100 grammes. The given division on classes does not contain any information on length of a fishing-rod.

Concrete conditions of a fishing of a pike demand, certain length of a fishing-rod. For a fishing from a boat the short fishing-rod for easy baits usually is required and the little long for baits is heavier. Fishing on the small river or a stream often demands longer fishing-rod that the bait did not cling to trees, bushes or a grass ashore, and also for the best control over a bait in a water stream.

On the big and open water spaces it is better to use a long fishing-rod for distant throws. As a rule, at a long fishing-rod of throws further, than at the short. Even if both are calculated on identical weight of a bait. Long fishing-rods are more sensitive to unexpected jerks of a pike, however at a fishing under low hanging branches of trees them to use inconveniently.

Fishing-rods for a trolling frequently too elastic also do not approach for usual throws. Their primary goal - to distribute pressure along a fishing-line to a bait at a pike take out. For a trolling with a downrigger in lakes and coastal waters fishing-rods of an average system, by length 240 - 270 centimetres, with 10 - 12 throughput rings are usually used.

Telescopic fishing-rods are convenient for travelling fishers, however this design is deprived many high qualities of integral fishing-rods. At the travelling fisher 4 - the 5-section fishing-rod takes a few places that is convenient enough.

Handles of fishing-rods and Reels holders

The Form of a handle of a fishing-rod partially depends on reel type. It can be an inertialess reel, an inertialess reel of the closed type or a step-up-gear reel.

Long fishing-rods are usually equipped by the extended handles that allows the fisher to do a throw by both hands. Handles become from various materials and become covered by porous rubber, a stopper or other convenient materials. Reels holders settle down on a handle of a fishing-rod and are intended for reel fixing. The fishing-rods intended for step-up-gear reels, in most cases are equipped by the fixed reel holder. And spinnings fishing-rods have the fixed or sliding reel holder who can consist all of two rings (sliding fixture), allowing to fix the reel in any place on a handle.

Throughput rings

Each fisher wishes to have the maximum contact to a bait being in water. As too the considerable quantity of rings reduces sensitivity of a fishing-rod, their quality constantly improves, metal rings, for example, are now used all less often.

In day of fishing through throughput rings there pass many kilometres of a fishing-line, however it is same 1 - 50 metres. Rings are intended to reduce a friction and to protect a fishing-line from deterioration. They should be strong not to suffer from microscopic grains of sand which often stick to a wet fishing-line.

 

Besides, rings should be superficial and not such rigid not to affect weight and fishing-rod work. They also should distribute pressure of a fishing-line on all length of a fishing-rod. The insufficient or superfluous quantity of rings can negatively affect both the fishing-rod, and on its work.
Several decades ago throughput rings were made of the chromeplated steel, the enameled metal, tungsten or ceramics. Now the most part of rings is made from oxide of aluminium, silicon or "hardloy" carbide.

 

Though the rings made of these three materials, usually are called as ceramic, they have no anything the general with former throughput rings which were really made from ceramics and which can be met till now on cheap fishing-rods for sea fishing.

 

The Great value has even diameter of these rings. For fishing-rods with inertialess reels throughput rings of greater diameter, than for on what there are step-up-gear reels or reels with the closed hasp are required. If you fish with the inertialess reel and a fishing-rod with rings of small diameter, force of a throw decreases, and the signal going from a bait, at first arrives on a fishing-rod and only then reaches the reel and a handle.